Victron MultiPlus 12/800/35-16 Compact
Victron MultiPlus 12/800/35-16 Compact For small 230V consumers in vessels, vehicles, industrial and infrastructure applications where space is limited, such as a camper van, a sloop, or a service cabinet. The battery cables are already attached, the 35A charger keeps the 12V battery charged, and in the event of a mains failure, the inverter takes over power within 20 ms. Also known as Compact 12/800. Battery voltage Suitable for 12V battery banks, with a DC input range of 9.5V to 17V. The output delivers 230 VAC ±2% at 50 Hz ±0.1%, adjustable to 60 Hz. The charger accepts 187-265 VAC at 45-65 Hz. Power Continuous 700W at 25 °C, 650W at 40 °C and 400W at 65 °C; Nominal 800VA. Peak power 1600W. Maximum efficiency 92%. No-load power 8W, 5W in AES mode, and 2W in search mode. The automatic transfer switch handles a maximum of 16A; PowerControl limits the charging current in case of a limited grid connection, and PowerAssist supplements any deficit from the battery. Battery charger: Adaptive four-stage charger with BatterySafe, charging current 35A down to 25°C. Charging voltages 14.4V absorption, 13.8V trickle, and 13.2V storage, adjustable via DIP switches or VEConfigure. A separate starter battery output delivers 4A at a slightly lower voltage. The battery temperature sensor is included. Connectable: Up to six identical units in parallel, or three in a three-phase configuration. Two RJ45 VE.Bus ports. Remote control via a Digital Multi Control, the VE.Bus Smart dongle, or a GX device such as the Cerbo GX. Construction Compact aluminum housing in blue (RAL 5012), fan-cooled, operating temperature -40 to +65 °C. Protected against short circuit, overload, over- and under-battery voltage, over-temperature, 230 VAC on the inverter output, and excessive ripple voltage on the input. Installation 1.5 m (16mm², with M8 terminals) battery cables are fitted. Victron recommends 35mm² for longer cables up to 5 m or 70mm² for 5 to 10 m. The 230V connection is made via a G-ST18i connector with a flexible 2.5mm² three-core cable. Victron does not specify a value for an external DC fuse; however, always protect the battery cables. Communication VE.Bus via RJ45. Configuration via the DIP switches, via VEConfigure with an MK3 USB interface, or via VictronConnect with the VE.Bus Smart dongle. Monitoring via the VRM Portal – Victron Energy (https://vrm.victronenergy.com/login) with a GX device. The programmable relay (standard alarm relay) switches 230V/4A AC, 4A up to 35 VDC, or 1A up to 60 VDC. A two-pole terminal for on/off and remote charging only. General One AC output; a second output is only available on models from 3kVA upwards. In the event of a power outage, the inverter takes over the power supply within 20 ms. The search mode reduces idle consumption by approximately 70% and only operates without grid connection; AES is configured using VEConfigure. Included Inverter-charger with pre-assembled 1.5 m battery cables, battery temperature sensor, mounting bracket, and five screws. Can be ordered directly * Red battery cable 35mm² per meter (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KABRD0103500), KABRD0103500 (category Battery cables (https://shop.top.systems/installatie/kabels/accu/)) * Black battery cable 35mm² per meter (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KABZW0103500), KABZW0103500 (category Battery cables (https://shop.top.systems/installatie/kabels/accu/)) * Crimp cable lug 35mm² > M8 (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=PSKABOG00036), PSKABOG00036 (category Press cable eyes (https://shop.top.systems/installation/accessories-cables/press cable eyes/)) * MEGA-fuse fuse holder 2xM8 (https://shop.top.systems/beveiligen- Schakelen/zekeringhouders/mega-fuse-zekeringhouder2xm8.html), ZEKHD0000200 (category Fuse Holders (https://shop.top.systems/beveiligen- Schakelen/zekeringhouders/)) * Victron VE.Bus Smart dongle (https://shop.top.systems/monitoring-control/draadloos/victron-ve-bus-smart-dongle.html), ASS030537010 * Victron interface MK3-USB (VE.Bus to USB) (https://shop.top.systems/installation/interface/victron-interface-mk3-usb-ve-bus-to-usb.html), ASS030140000-C * Victron Digital Multi Control 200/200A (https://shop.top.systems/monitoring-control/controlpanels/victron-digital-multi-control-200-200a.html), REC020005010 (category Control Panels (https://shop.top.systems/monitoring-control/controlpanelen/)) * Victron Digital Multi Control 200/200A GX (90º) (https://shop.top.systems/monitoring-control/controlpanelen/victron-digital-multi-control-200-200a-gx-90.html), DMC000200010R (category Control panels (https://shop.top.systems/monitoring-controle/bedieningspanelen/)) * Victron Cerbo GX MK2 (https://shop.top.systems/monitoring-controle/bedieningspanelen/victron-cerbo-gx-mk2.html), BPP900451100 (category Control panels (https://shop.top.systems/monitoring-controle/bedieningspanelen/)) Related products * Victron MultiPlus 12/1200/50-16 Compact (https://shop.top.systems/omvormen-laden/omvormen-laden-combi/cmp122120000ictron-multiplus-12-1200-50-16-compact.html), CMP122120000 * Victron MultiPlus 12/1600/70-16 Compact (https://shop.top.systems/omvorm-laden/omvorm-laden-combi/victron-multiplus-12-1600-70-16-compact.html), CMP122160000 * Victron MultiPlus 12/2000/80-30 Compact (https://shop.top.systems/omvorm-laden/omvorm-laden-combi/victron-multiplus-12-2000-80-30-compact.html), CMP122200000 Documentation * Datasheet MultiPlus 800VA – 5kVA (NL) (https://www.victronenergy.com/upload/documents/Datasheet-MultiPlus-inverter-charger-800VA-5kVA-NL.pdf) * Datasheet MultiPlus 800VA – 5kVA (EN) (https://www.victronenergy.com/upload/documents/Datasheet-MultiPlus-inverter-charger-800VA-5kVA-EN-.pdf) * Manual MultiPlus Compact 800VA, 1200VA and 1600VA 230V (multilingual, incl. NL and EN) (https://www.victronenergy.com/upload/documents/Manual-MultiPlus-Compact-800-1200-1600-EN-NL-FR-DE-ES.pdf) * Quick Install Guide Compact MultiPlus 12V 24V 800VA 1200VA 1600VA 230Vac (EN) (https://www.victronenergy.com/upload/documents/Quick-Install-Guide-Compact-Multiplus-12V-24V-800VA-1200VA-1600VA-230V….pdf) * VE.Bus parallel, split and three-phase systems (EN) (https://www.victronenergy.com/live/ve.bus:manual_parallel_and_three_phase_systems) * VE.Bus error codes (EN) (https://www.victronenergy.com/live/ve.bus:ve.bus_error_codes) * EU Declaration of Conformity MultiPlus Compact 800VA – 2000VA (https://www.victronenergy.com/upload/documents/MultiPlus-Compact-800VA-2000VA-2021-12-29.pdf) * ECE R10 Certificate 12V MultiPlus Compact and Inverters (https://www.victronenergy.com/upload/documents/Certificate-Automotive-ECE-R10-6-12V-MultiPlus-Compacts-&-Inverters.pdf) * IEC/EN Certificate 60335 12V and 24V Multi Compact (https://www.victronenergy.com/upload/documents/Certificate-Safety-EN-IEC-60335-all-12V-and-24V-Multi-Compact.pdf) * Victron Energy ISO 9001 Certificate (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) Videos * Did You Know – You can update a MultiPlus Firmware using an Android Phone? (EN) (https://youtu.be/AEPmjkyg7UY) * VEConfigure basic (EN) (https://www.youtube.com/watch?v=V1Zceq02vMA) Q&A Can I use the Compact with lithium batteries? Yes, you set the charging voltages using the DIP switches or VEConfigure. In setup mode, temperature compensation is disabled. Why does the inverter consume more power than the device? Add the no-load power (8W) and the efficiency loss. Search mode reduces no-load consumption by approximately 70%. Why does the charger remain in the bulk phase for a long time? Bulking lasts until the absorption voltage is reached. PowerControl and high temperatures reduce the charging current, causing bulking to take longer. Can I connect multiple units in parallel or in three-phase? Yes, up to six identical units in parallel or three in three-phase. Does the Compact have a second AC output? No, the Compact has one AC output; a second output is only available on MultiPlus models from 3kVA upwards. Contact Would you like to know which cable, fuse, or remote control belongs to your installation, or how to configure PowerAssist for your shore power or generator? Feel free to contact us; we are happy to help you think about your system. Contact Top Systems (https://www.top.systems/nl/contact/). Specifications Battery voltage 12V DC input range 9.5-17V Rated power 800VA Continuous power 25/40/65 °C 700W / 650W / 400W Peak power 1600W House battery charging current 35A Starter battery charging current 4A Charging voltage absorption/trickle/storage 14.4V / 13.8V / 13.2V Automatic transfer switch 16A Maximum efficiency 92% No-load power / AES / search mode 8W / 5W / 2W PowerControl / PowerAssist Yes / Yes AC outputs 1 Output voltage 230 VAC ±2%, 50 Hz ±0.1% Communication VE.Bus, 2x RJ45 Parallel / three-phase Up to 6 in parallel; 3-in-3 three-phase Programmable relay 230V/4A AC, 4A up to 35 VDC, 1A up to 60 VDC Battery cables 1.5 m, 16mm², M8 terminals (mounted) Battery cable 1.5-5 m / 5-10 m 35mm² / 70mm² AC connection G-ST18i connector Battery temperature sensor Included Housing Aluminium, blue RAL 5012 Operating temperature -40 to +65 °C, fan-cooled Weight 10 kg Standards EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1 Warranty 5 years EAN 8719076065067 We would be happy to provide you with more information about this product. Please contact us
contact join us.