Victron MultiPlus 48/2000/25-32

Available for backorder

Original price was: € 694.54.Current price is: € 590.36.

Victron MultiPlus 48/2000/25-32 – We would be happy to provide you with more information about this product. Please contact us.

PMP482200000

Available for backorder

Victron MultiPlus 48/2000/25-32

Victron MultiPlus 48/2000/25-32 For 230V consumers up to 1600W continuous on a 48V battery bank in homes, off-grid living, commercial buildings, and drives, such as an emergency power generator, a water treatment plant, or a telecom cabinet. The 32A automatic transfer switch utilizes a heavier grid connection, and in the event of a power outage, the inverter takes over the power supply within 20 ms. Also known as 48/2k. Battery voltage Suitable for 48V battery banks, with a DC input range of 38V to 66V. The output delivers 230 VAC ±2% ​​at 50 Hz ±0.1%. The charger accepts 187-265 VAC at 45-65 Hz. Power Continuous 1600W at 25 °C, 1400W at 40 °C, and 1000W at 65 °C; Nominal 2000VA. Peak power 3500W. Maximum efficiency 95%. The automatic transfer switch handles a maximum of 32A; PowerControl limits the charging current in case of a limited mains connection, and PowerAssist supplements any deficit from the battery. Battery charger: Adaptive four-stage charger with BatterySafe, charging current 25A down to 25°C. Charging voltages: 57.6V absorption, 55.2V trickle, and 52.8V storage. The battery temperature sensor is included. Connectable: Up to six units in parallel, or three in a three-phase star configuration. Two RJ45 VE.Bus ports. Remote control via a Digital Multi Control, the VE.Bus Smart dongle, or a GX device such as the Cerbo GX. Construction: Blue housing (RAL 5012), protection class IP21, fan-cooled, operating temperature -40 to +65°C. It does not contain an internal DC fuse. Protected against short circuit, overload, over- and under-battery voltage, over-temperature, 230 VAC on the inverter output, and excessive ripple voltage on the input. Installation: Victron recommends an external 100A DC fuse and 25mm² battery cable for cable lengths up to 5 m, or 50mm² for lengths from 5 to 10 m. Connect the battery using M8 bolts with 12 Nm. AC connection to screw terminals of up to 13mm² with 1.6 Nm; use AC cable of at least 6mm² and protect the AC input with a maximum of 32A. Communication: VE.Bus via two RJ45 ports. Configuration via the DIP switches, via VEConfigure with an MK3 USB interface, or via VictronConnect with the VE.Bus Smart dongle. Monitoring via the VRM Portal – Victron Energy (https://vrm.victronenergy.com/login) with a GX device. The programmable relay (standard alarm relay) switches 230V/4A AC, 4A up to 35 VDC, or 1A up to 60 VDC. Remote on/off is possible. General: When mains voltage is present, the automatic transfer switch passes through the AC voltage and the combination charges the battery. If the mains fails, the inverter takes over the power supply within 20 ms. Included: Inverter charger and battery temperature sensor. Can be ordered directly * Red battery cable 25mm² per meter (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KABRD0102500), KABRD0102500 (category Battery cables (https://shop.top.systems/installatie/kabels/accu/)) * Black battery cable 25mm² per meter (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KABZW0102500), KABZW0102500 (category Battery cables (https://shop.top.systems/installatie/kabels/accu/)) * Crimp cable lug 25mm² > M8 (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=PSKABOG00026), PSKABOG00026 (category Crimp lugs (https://shop.top.systems/installatie/accessoires-kabels/perskabelogen/)) * Cable set 25mm² 1.5 m red and black M8-M8 (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KABSET010251), KABSET010251 (category Battery cables (https://shop.top.systems/installatie/kabels/accu/)) * LittelFuse fuse 100A MEGA 70V-SF51 (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=ZEKLFM070100), ZEKLFM070100 (category Fuses (https://shop.top.systems/beveiligen-schakelen/zekeringen/)) * Mega fuse holder M8 35-300A (https://shop.top.systems/beveiligen-schakelen/zekeringhouders/mega-zekeringhouder-m8-35-300a.html), ZEKHD0000800 (category Fuse holders (https://shop.top.systems/beveiligen-schakelen/zekeringhouders/)) * Victron VE.Bus Smart dongle (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=ASS030537010), ASS030537010 * Victron interface MK3-USB (VE.Bus to USB) (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=ASS030140000-C), ASS030140000-C * Victron Digital Multi Control 200/200A (https://shop.top.systems/monitoring-control/controlpanels/victron-digital-multi-control-200-200a.html), REC020005010 (category Control panels (https://shop.top.systems/monitoring-control/controlpanels/)) * Victron Digital Multi Control 200/200A GX (90º) (https://shop.top.systems/monitoring-control/controlpanels/victron-digital-multi-control-200-200a-gx-90.html), DMC000200010R (category Control Panels (https://shop.top.systems/monitoring-controle/bedieningspanelen/)) * Victron Cerbo GX MK2 (https://shop.top.systems/monitoring-controle/bedieningspanelen/victron-cerbo-gx-mk2.html), BPP900451100 (category Control Panels (https://shop.top.systems/monitoring-controle/bedieningspanelen/)) Related products * Victron MultiPlus 48/3000/35-50 (https://shop.top.systems/omvormen-laden/omvormen-laden-combi/victron-multiplus-48-3000-35-50.html), PMP483021010 * Victron MultiPlus 48/5000/70-100 (https://shop.top.systems/omvorm-laden/omvorm-laden-combi/victron-multiplus-48-5000-70-100.html), PMP485021010 * Victron MultiPlus 48/20000/250-100 (https://shop.top.systems/omvorm-laden/omvorm-laden-combi/multiplus-48-20000-250-100.html), PMC483200400 * Victron MultiPlus 48/1600/20-16 (https://shop.top.systems/omvorm-laden/omvorm-laden-combi/victron-multiplus-48-1600-20-16.html), PMP482160000 Documentation * Datasheet MultiPlus 500VA – 2000VA (NL) (https://www.victronenergy.com/upload/documents/Datasheet-MultiPlus-500VA-2000VA-NL.pdf) * Datasheet MultiPlus 500VA – 2000VA (EN) (https://www.victronenergy.com/upload/documents/Datasheet-MultiPlus-500VA-2000VA-EN.pdf) * Manual MultiPlus 2kVA 230V (NL) (https://www.victronenergy.com/upload/documents/MultiPlus_2kVA_230V/24547-MultiPlus_2kVA-pdf-nl.pdf) * Manual MultiPlus 2kVA 230V (EN) (https://www.victronenergy.com/upload/documents/MultiPlus_2kVA_230V/24547-MultiPlus_2kVA-pdf-en.pdf) * Online manual MultiPlus 2kVA 230V (NL) (https://www.victronenergy.com/media/pg/MultiPlus_2kVA_230V/nl/index-nl.html) * Online manual MultiPlus 2kVA 230V (EN) (https://www.victronenergy.com/media/pg/MultiPlus_2kVA_230V/en/index-en.html) * Dimensions MultiPlus 12V 24V 48V 2000VA (https://www.victronenergy.com/upload/documents/MultiPlus-12V-24V-48V-2000VA-120V-230V.pdf) * VE.Bus parallel, split, and three-phase systems (EN) (https://www.victronenergy.com/live/ve.bus:manual_parallel_and_three_phase_systems) * VE.Bus error codes (EN) (https://www.victronenergy.com/live/ve.bus:ve.bus_error_codes) * EU Declaration of Conformity MultiPlus 500VA – 2000VA (https://www.victronenergy.com/upload/documents/MultiPlus-500VA-2000VA-2022-07-04.pdf) * Certificate EN-IEC 62109-1 and IEC 60335-2-29 all MultiPlus and Quattro up to 15k (https://www.victronenergy.com/upload/documents/Certificate-Safety-EN-IEC-62109-1-&-IEC-60335-2-29-all-Multiplus-&-Quattros-incl.-15k.pdf) * Victron Energy ISO 9001 Certificate (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) Q&A Which fuse and battery cable should I use? Victron recommends a 100A DC fuse and 25mm² for up to 5 m or 50mm² for 5 to 10 m. There is no internal DC fuse. Can I connect multiple units in parallel or in three-phase? Yes, up to six identical units in parallel or three in three-phase, in star; with the two VE.Bus ports, no splitter is required. Which RCD may be installed on the output? Type A is permitted. Connect the housing to earth. Does the 48V version have a starter battery output? No, the starter battery output is only available on the 12V and 24V versions. Can I use a heavier fuse for the AC input? No, protect the AC input with a maximum of 32A, the rating of the changeover switch. Contact Do you want to know which cable, fuse, or remote control belongs to your installation, or how to connect multiple devices? Feel free to contact us; we are happy to help you think about your system. Contact Top Systems (https://www.top.systems/nl/contact/). Specifications Battery voltage 48V DC input range 38-66V Nominal power 2000VA Continuous power 25/40/65 °C 1600W / 1400W / 1000W Peak power 3500W Charging current 25A Charging voltage absorption/trickle/storage 57.6V / 55.2V / 52.8V Automatic transfer switch 32A Maximum efficiency 95% PowerControl / PowerAssist Yes / Yes Charger AC input 187-265 VAC, 45-65 Hz Output voltage 230 VAC ±2%, 50 Hz ±0.1% Communication VE.Bus, 2x RJ45 Parallel / three-phase Up to 6 in parallel; 3 in three-phase (star) Programmable relay 230V/4A AC, 4A up to 35 VDC, 1A up to 60 VDC Internal DC fuse None Recommended DC fuse 100A Battery cable 0-5 m / 5-10 m 25mm² / 50mm² Battery connection M8 bolts, 12 Nm AC connection Screw terminals max. 13mm², 1.6 Nm Battery temperature sensor Included Protection class IP21 Operating temperature -40 to +65 °C, fan-cooled Dimensions (hxwxd) 506 x 236 x 147 mm Weight 15.5 kg Warranty 5 years EAN 8719076049470 We would be happy to provide you with more information about this product. Please contact us contact join us.
an electric sloop? See our full range.