Victron MultiPlus-II 12/5000/220-50

Available for backorder

Original price was: € 2,152.59.Current price is: €1,829.70.

Victron MultiPlus-II 12/5000/220-50 – We would be happy to provide you with more information about this product. Please contact us.

PMP122505012

Available for backorder

Victron MultiPlus-II 12/5000/220-50

Victron MultiPlus-II 12/5000/220-50 For heavy 230V loads up to 4000W continuous on a 12V battery bank in vessels, vehicles, industrial and infrastructure applications, such as a yacht with induction cooking or a service vehicle with a compressor. The 50A automatic transfer switch also handles a heavier shore power or generator connection. Also known as 12/5k; expansion is possible in parallel or in three-phase. Battery voltage Suitable for 12V battery banks, with a DC input range of 9.5-17V. The AC input accepts 187-265 VAC at 45-65 Hz; the output delivers 230 VAC ±2% ​​at 50 Hz ±0.1%, switchable to 60 Hz. Power Continuous 4000W at 25 °C, 3700W at 40 °C and 3000W at 65 °C; Nominal 5000VA at crest factor 3:1. Peak power 9000W. Maximum efficiency 95%. No-load power 15W, 11W in AES mode. The automatic transfer switch handles a maximum of 50A; with PowerControl and PowerAssist, the combination limits the input current and supplements any deficit from the battery. Battery charger: Adaptive four-phase charger with bulk, absorption, trickle, and storage (BatterySafe), absorption duration up to 8 hours and repeated absorption of 1 hour once every 7 days. Charging voltages: 14.4V absorption, 13.8V trickle, and 13.2V storage. Voltage detection compensates for up to 1V loss per cable. A separate starter battery output provides 4A trickle charge via a diode. The battery temperature sensor is included. Connectable: Up to six identical devices in parallel on the same battery, using DC cables of equal length and cross-section and UTP cables directly from device to device. Three-phase only in star configuration, not in delta. Use one remote control per system. Operation and readout via a Digital Multi Control, the VE.Bus Smart dongle, or a GX device such as the Cerbo GX. Construction Steel housing in blue (RAL 5012), protection class IP22, fan-cooled, operating temperature -40 to +65 °C. Protected against short circuit, overload, over- and under-battery voltage, over-temperature, 230 VAC on the inverter output, and excessive ripple voltage on the input. Installation Victron recommends a 600A DC fuse and battery cable of 2x 95mm² for cable lengths up to 5 m, or 2x 150mm² for 5 to 10 m; copper cable suitable for 90 °C, not in a closed conduit. Connect the battery to M8 bolts with 12 Nm. Protect the AC input with a fuse or circuit breaker of maximum 50A. AC connection on screw terminals of maximum 13mm²; earth on M6 with 5.5 Nm. A type A RCD is permitted on the output. Communication VE.Bus with two RJ45 ports; no VE.Can or BMS-Can. Configuration with VEConfigure or VictronConnect via an MK3 USB interface or the VE.Bus Smart dongle. A GX device is required for monitoring via the VRM Portal – Victron Energy (https://vrm.victronenergy.com/login) and for ESS. Furthermore, two programmable auxiliary inputs, a programmable relay (4A up to 35 VDC, 1A up to 60 VDC), an open-collector output, and remote on/off. General AC-out-1 is uninterruptible: in the event of a power outage, the inverter takes over the power supply within 20 ms. AC-out-2 is a 32A auxiliary output that switches off during battery operation and switches back on approximately 2 minutes after the return of mains power, for example for a water heater. This model is not listed on the Victron certificates for EN 50549-1. Included: Inverter charger and battery temperature sensor. Can be ordered directly * Red battery cable 95mm² per meter (https://shop.top.systems/installatie/kabels/accu/accukabel-rood-95mm-per-meter.html), KABRD0109500 (category Battery cables (https://shop.top.systems/installatie/kabels/accu/)) * Black battery cable 95mm² per meter (https://shop.top.systems/installatie/kabels/accu/accukabel-zwart-95mm-per-meter.html), KABZW0109500 (category Battery cables (https://shop.top.systems/installatie/kabels/accu/)) * Crimp cable lug 95mm² > M8 (https://shop.top.systems/installatie/accessoires-kabels/perskabelogen/perskabeloog-95mm-m8.html), PSKABOG00094 (category Crimp cable lugs (https://shop.top.systems/installation/accessories-cables/press-cable-eyes/)) * Victron VE.Bus Smart dongle (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=ASS030537010), ASS030537010 * Victron Digital Multi Control 200/200A (https://shop.top.systems/monitoring-control/controlpanels/victron-digital-multi-control-200-200a.html), REC020005010 (category Control panels (https://shop.top.systems/monitoring-control/controlpanels/)) * Victron Digital Multi Control 200/200A GX (90º) (https://shop.top.systems/monitoring-controle/bedieningspanelen/victron-digital-multi-control-200-200a-gx-90.html), DMC000200010R (category Control panels (https://shop.top.systems/monitoring-controle/bedieningspanelen/)) * Victron Cerbo GX MK2 (https://shop.top.systems/monitoring-controle/bedieningspanelen/victron-cerbo-gx-mk2.html), BPP900451100 (category Control panels (https://shop.top.systems/monitoring-controle/bedieningspanelen/)) * TS Enovations IMD3+ Insulation monitor (https://shop.top.systems/beveiligen-schakelen/isolatiebewakers/ts-enovations-imd3-isolatiebewaker.html), SHP302501460 (category Insulation monitors (https://shop.top.systems/beveiligen-schakelen/isolatiebewakers/)) Related products * Victron MultiPlus-II 12/4k/160-32 230V (https://shop.top.systems/omvormen-laden/omvormen-laden-combi/victron-multiplus-ii-12-4k-160-32-230v.html), PMP122405010 Documentation * Datasheet MultiPlus-II inverter/charger 230V (NL) (https://www.victronenergy.com/upload/documents/Datasheet-MultiPlus-II-inverter-charger-NL.pdf) * Datasheet MultiPlus-II 3kVA – 15kVA 230V (EN) (https://www.victronenergy.com/upload/documents/Datasheet-MultiPlus-II-inverter-charger-EN-.pdf) * MultiPlus-II Manual 230V (NL) (https://www.victronenergy.com/upload/documents/MultiPlus-II_230V/32424-MultiPlus-II___Quattro-II-pdf-nl.pdf) * Manual MultiPlus-II 230V (EN) (https://www.victronenergy.com/upload/documents/MultiPlus-II_230V/32424-MultiPlus-II___Quattro-II-pdf-en.pdf) * Online manual MultiPlus-II 230V (NL) (https://www.victronenergy.com/media/pg/MultiPlus-II_230V/nl/index-nl.html) * Online manual MultiPlus-II 230V (EN) (https://www.victronenergy.com/media/pg/MultiPlus-II_230V/en/index-en.html) * VE.Bus parallel, split and three-phase systems (EN) (https://www.victronenergy.com/live/ve.bus:manual_parallel_and_three_phase_systems) * VE.Bus error codes (EN) (https://www.victronenergy.com/live/ve.bus:ve.bus_error_codes) * EU Declaration of Conformity MultiPlus-II (https://www.victronenergy.com/upload/documents/DoC-MultiPlus-II-(EU)-0226.pdf) * Certificate IEC 60335-1 / 60335-2 MultiPlus-II (GX) 3kVA to 15kVA (https://www.victronenergy.com/upload/documents/Certificate-IEC-60335-1-60335-2-MultiPlus-II-(GX)-3kVA,-5kVA,-8kVA,-10kVA-&-15kVA.pdf) * Certificate EN-IEC 62109-1 and 2 all MultiPlus-II (GX) (https://www.victronenergy.com/upload/documents/Certificate-EN-IEC-62109-1-2-all-MultiPlus-II-(GX).pdf) * Certificate IEC 62116 all MultiPlus-II and MultiPlus-II GX (https://www.victronenergy.com/upload/documents/Certificate-ESS-IEC-62116-all-MultiPlus-II-and-MultiPlus-II-GX.pdf) * Certificate ECE R10-6 MultiPlus-II 12V 5kVA 230V (https://www.victronenergy.com/upload/documents/Certificate-Automotive-ECE-R10-6-MultiPlus-II-12V-5kVA-230V.pdf) * MultiPlus-II Dimensions 12/5000/220-50 230V (https://www.victronenergy.com/upload/documents/MultiPlus-II-12V5000VA-220-50-230V-PMP122505010.pdf) * ISO 9001 certificate Victron Energy (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) Videos * Introduction: MultiPlus-II (EN) (https://www.youtube.com/watch?v=nU5yUY6VhIU) * Did You Know – You can update a MultiPlus Firmware using an Android Phone? (EN) (https://youtu.be/AEPmjkyg7UY) Question & Answer Why does AC-out-2 switch off on battery power? It is designed this way: AC-out-2 switches off immediately during battery operation and switches back on approximately 2 minutes after the return of mains voltage. Can I connect devices in parallel or in three-phase? Yes, up to six identical devices on the same battery, with identical DC cables and direct UTP connections; three-phase only in star, not delta. Which RCD is allowed on the output? Type A is permitted. The built-in earth relay connects neutral and earth in inverter operation; for mobile installations, the housing must be connected to the chassis or hull. What settings do I use for an inverter generator or low shore power? Use PowerControl and PowerAssist with the AC input current limiting and switch on the dynamic current limiter for inverter generators; WeakAC is for distorted mains voltage. Can I use this device for ESS with feed-in? ESS requires a GX device. This model is not listed on the Victron certificates for EN 50549-1; only 24/3000, 48/3000, and 48/5000 are listed there. Contact Would you like to know which cable, fuse, or GX device belongs to your installation, or how to connect multiple devices? Feel free to contact us; we are happy to help you think about your system. Contact Top Systems (https://www.top.systems/nl/contact/). Specifications Battery voltage 12V DC input range 9.5-17V Nominal power 5000VA Continuous power 25/40/65 °C 4000W / 3700W / 3000W Peak power 9000W Charging voltage absorption/trickle/storage 14.4V / 13.8V / 13.2V Automatic transfer switch 50A Maximum efficiency 95% No-load power / AES 15W / 11W AC input 187-265 VAC, 45-65 Hz Output voltage 230 VAC ±2%, 50 Hz ±0.1% AC output -232A, mains voltage only PowerControl / PowerAssist Yes / Yes Communication VE.Bus, 2x RJ45 Parallel / three-phase Up to 6 identical devices; Three-phase star connection Recommended DC fuse 600A Battery cable 0-5 m / 5-10 m 2x 95mm² / 2x 150mm² Battery connection M8 bolts, 12 Nm AC connection Screw terminals max. 13mm² Housing Steel, blue RAL 5012 Protection class IP22 Operating temperature -40 to +65 °C, fan-cooled Dimensions (hxwxd) 702 x 345 x 152 mm Weight 33 kg Standards EN-IEC 60335-1, 60335-2-29, 62109-1, 62109-2 Warranty 5 years EAN 8719076065920 We would be happy to provide you with more information about this product. Please contact us contact join us.
an electric sloop? See our full range.