Victron Phoenix inverter 12/800 120V VE.Direct NEMA 5-15R

Victron Phoenix inverter 12/800 120V VE.Direct NEMA 5-15R

Victron Phoenix inverter 12/800 120V VE.Direct NEMA 5-15R The Phoenix 12/800 is a powerful pure sine wave inverter with a capacity of 800 VA (650 Watts) in a single compact housing. This Phoenix is ​​supplied without the required 25mm² cables. The Phoenix series of sine wave inverters from Victron Energy is developed for professional use and can be used for a wide range of electricity applications – anytime, anywhere! The inverters convert DC current into AC alternating current. This allows household appliances – from kettles to televisions – to be used at any time in, for example, cars, campers, boats, or garden or beach houses. A noisy generator is then no longer necessary. Each pure sine wave inverter has a high peak output and effortlessly supplies power for any load. Victron Energy inverters are designed for professional use. They are suitable for a wide range of devices with high and low starting power requirements. VE.Direct Communication Port The Phoenix VE.Direct series inverter is equipped with a VE.Direct communication port, allowing the inverter to be connected to a computer using a VE.Direct to USB interface cable or to Apple and Android smartphones, tablets, MacBooks, and other devices using a VE.Direct Bluetooth Smart dongle. This makes the inverter fully configurable for the following functionality: > Switching and reset levels > Low battery voltage alarm > Shutdown and restart levels > Low battery voltage alarm > Dynamic cut-off: load-dependent cut-off level > Output voltage 210 – 245V > Frequency 50 Hz or 60 Hz > ECO mode on/off and ECO mode detection level > Monitoring: Input and output voltage, % load, and alarms Proven reliability The full bridge plus toroidal inverter topology has proven its reliability for many years. The inverters are short-circuit resistant and protected against overheating, regardless of whether this is caused by overload or high ambient temperature. High starting power Required to start loads, such as power inverters for LED lights, halogen lights, or power tools. ECO mode In ECO mode, the inverter switches to standby if the load drops below a preset value (minimum load: 15W). Once in standby, the inverter is switched on for a short time (adjustable, default every 2.5 seconds). If the load exceeds a preset level, the inverter remains switched on. Remote On/Off A remote on/off switch can be connected to a two-pin plug or between the positive terminal of the battery and the left contact of the two-pin plug. We would be happy to provide you with more information about this product. Please contact us contact join us.