Victron Quattro-II 24/5000/120-50/50

Victron Quattro-II 24/5000/120-50/50

Victron Quattro-II 24/5000/120-50/50 Applications The successor generation for installations with shore power and a generator, designed for stricter grid codes. Delivers 4000 W continuously, charges at 120 A, and can feed back up to 5000 VA. Efficiency 96% and only 18 W no-load consumption. Inverter, charger, and dual changeover switch in one Pure sine wave inverter, adaptive four-stage charger, and two AC changeover switches in a single steel housing with protection class IP21. Protected against short circuit, overload, over- and under-battery voltage, over-temperature, mains voltage on the inverter output, and excessive input ripple. Two AC inputs with integrated changeover switch Two independent sources can be connected, each with its own adjustable current limit and 50 A throughput capacity. The device automatically selects the active source by priority. Two AC outputs The main output switches over within 20 milliseconds, making it uninterrupted. The 32 A auxiliary output switches off by default in inverter mode, suitable for consumers that must not discharge the battery bank. Feed-in and grid connection Maximum apparent feed-in power 5000 VA. This makes the device suitable for self-consumption and storage applications where surplus is fed into the grid. PowerControl A current limit can be set per AC input. The device charges exclusively with the remaining current, ensuring that the shore or generator connection is not overloaded. PowerAssist Immediately supplements a shortage of shore or generator power from the battery bank. As soon as the load decreases, the surplus is used to recharge the battery bank. Charging * Adaptive four-stage characteristic: bulk, absorption, trickle, storage, with BatterySafe mode * Charging voltages 28.8 V absorption, 27.6 V trickle, 26.4 V storage * 120 A charging current down to 25 °C ambient temperature * Battery temperature sensor present Low self-consumption No-load consumption 18 W, 12 W in AES mode and 2 W in search mode. Maximum efficiency 96 %. Programmable relay Can be set as general alarm, DC undervoltage warning, or generator start/stop. Contact load 230 VAC / 4 A, or 4 A up to 35 VDC and 1 A up to 60 VDC. Parallel and three-phase Configurable via VE.Bus for parallel and three-phase operation with VE.Bus Quick Configure and VE.Bus System Configurator. Two general-purpose communication ports and a remote on/off input are present. Connection Battery connection via M8 bolts; Battery cables are not included; 2x 50 mm² is recommended for lengths up to 5 meters. AC connection via screw terminals up to 13 mm². Monitoring and configuration: VE.Bus port for remote monitoring and system integration. With a GX device as the communication center, the system can be monitored locally and via the internet on the VRM Portal – Victron Energy (https://vrm.victronenergy.com) from a smartphone, tablet, laptop, or PC. Can be ordered directly with this * Cable set 50mm² 1.5 m red and black M8-M8 — KABSET010501 — product (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KABSET010501) * Battery cable red 50mm² per meter — KABRD0105000 — product (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KABRD0105000) — category Battery cables (https://shop.top.systems/installatie/kabels/accu/) * Battery cable black 50mm² per meter — KABZW0105000 — product (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KABZW0105000) — category Battery cables (https://shop.top.systems/installatie/kabels/accu/) * LittelFuse fuse 400A MEGA (12-24V) — ZEKLFM000400 — product (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=ZEKLFM000400) — category Fuses (https://shop.top.systems/beveiligen-schakelen/zekeringen/) * TS Enovations Insulation monitor IMD3 — SHP302501450-C — product (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=SHP302501450-C) — category Insulation monitors (https://shop.top.systems/beveiligen-schakelen/isolatiebewakers/) * Victron SmartShunt 500A/50mV — SHU050150050 — product (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=SHU050150050) Related products * Quattro 24/5000/120-100/100 — QUA245021010 — view product (https://shop.top.systems/omvormen-laden/omvormen-laden-combi/quattro-24-5000-120-100-100.html) * MultiPlus-II 24/5000/120-50 — view product (https://shop.top.systems/omvormen-laden/omvormen-laden-combi/multiplus-ii-24-5000-120-50.html) Documentation * Datasheet Quattro-II inverter/charger (NL) (https://www.victronenergy.nl/upload/documents/Datasheet-Quattro-II-inverter-charger-NL-.pdf) * Datasheet Quattro-II Inverter/Charger (EN) (https://www.victronenergy.com/upload/documents/Datasheet-Quattro-II-inverter-charger-EN-.pdf) * Manual MultiPlus-II / Quattro-II 230V (NL) (https://www.victronenergy.com/upload/documents/Quattro-II_230V/32424-MultiPlus-II___Quattro-II-pdf-nl.pdf) * MultiPlus-II / Quattro-II 230V Manual (EN) (https://www.victronenergy.com/upload/documents/Quattro-II_230V/32424-MultiPlus-II___Quattro-II-pdf-en.pdf) * Quattro-II 230V Online Manual (NL) (https://www.victronenergy.com/media/pg/Quattro-II_230V/nl/index-nl.html) * Quattro-II 230V Online Manual (EN) (https://www.victronenergy.com/media/pg/Quattro-II_230V/en/index-en.html) * Quattro-II Dimensions 24V 5000VA 230V (https://www.victronenergy.com/upload/documents/Quattro-II-24V-5000VA-230V.pdf) * 3D Dimensions Quattro-II 24V 5000VA 230V (https://www.victronenergy.com/upload/documents/Quattro-II-24V-5000VA-230V-(3D).pdf) * EU Declaration of Conformity Quattro(-II) (https://www.victronenergy.com/upload/documents/Quattro(-II)-2023-12-08.pdf) * ISO 9001 Certificate (NL) (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-NL.pdf) * ISO 9001 Certificate (EN) (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) Contact We will determine with you whether the Quattro-II or the classic Quattro best suits your installation and supply the system complete with cabling, protection, and monitoring. Contact us (https://www.top.systems/nl/contact/). Specifications Specification Value Output power 25 °C 5000 VA / 4000 W Output power 40 °C 3700 W Output power 65 °C 3000 W Peak power 9000 W Maximum feed-in capacity 5000 VA Maximum efficiency 96 % Household battery charging current 120 A Automatic transfer switch 50 A Transfer current per AC input 50 A Battery voltage 24 V DC input range 19 – 33 V AC input 187 – 265 VAC, 45 – 65 Hz AC output 230 VAC ± 2 %, 50 Hz ± 0.1 % Number of AC inputs 2 Number of AC outputs 2 Auxiliary output 32 A PowerControl / PowerAssist Yes / Yes No-load power 18 W No-load power AES 12 W No-load power search mode 2 W Charging voltage absorption / trickle / storage 28.8 / 27.6 / 26.4 V Battery temperature sensor: Yes Programmable relay: 1, 230 VAC / 4 A Communication ports: VE.Bus, 2x general purpose, remote on/off Recommended battery capacity: 400 – 1400 Ah Battery connection: M8 bolts AC connection Screw terminals: 13 mm² Protection class: IP21 Housing material: Steel Dimensions (hxwxd): 607 x 329 x 149 mm Weight: 31 kg Operating temperature: -40 to +65 °C Humidity: Max. 95 %, non-condensing Safety: EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2 EAN: 8719076052920 We would be happy to provide you with more information about this product. Please contact us contact join us.