Victron SmartSolar MPPT 150/70-Tr VE.Can (12/24/48V)

Victron SmartSolar MPPT 150/70-Tr VE.Can (12/24/48V)

Victron SmartSolar MPPT 150/70-Tr VE.Can (12/24/48V) Victron SmartSolar MPPT 150/70 12/24/36/48V is a solar charger for 12V, 24V, 36V, or 48V systems (auto-select). The maximum nominal PV power transmitted by the solar charger at a 12V system voltage is 1000W; at a 24V system voltage, it is 2000W; at a 36V system voltage, it is 3000W; and at a 48V system voltage, it is 4000W. The maximum PV open-circuit voltage of this solar charger is 150V. The SmartSolar solar charge controllers feature a programmable battery charging algorithm and built-in Bluetooth Smart as standard to configure the solar charger and monitor solar output. With VE.Can or Bluetooth, up to 25 solar chargers can be daisy-chained and connected to a Color Control GX or other GX device. Each Controller can be managed individually, for example with a smartphone or iPad (Bluetooth) or with a Color Control GX (VE.Can), and optionally also via the VRM website. Built-in Bluetooth Smart: no dongle required. The wireless solution for setting up, monitoring, and updating the controller via Apple or Android smartphones, tablets, or other devices. VE.Direct For a wired data connection to a Color Control panel, Venus GX, PC, or other devices. Ultra-fast Maximum Power Point Tracking (MPPT). Especially when it is cloudy and light intensity is constantly changing, an ultra-fast MPPT controller improves energy yield by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in the event of varying shading. In the event of varying shading, the power-voltage curve may contain two or more maximum power points. Conventional MPPTs usually utilize local MPP, which may not be the optimal MPP. The innovative BlueSolar algorithm always maximizes energy yield by utilizing the optimal MPP. BatteryLife: Intelligent Battery Management. If a solar charge controller cannot fully recharge the battery in a single day, the result is often that the battery constantly fluctuates between 'partially charged' and 'fully discharged'. Due to this condition (no regular full charging), a lead-acid battery becomes irreparably damaged within a few weeks or months. The BatteryLife algorithm monitors the battery's charge status and, if necessary, slightly increases the load disconnection level day by day (by disconnecting the load earlier) until the harvested solar energy is sufficient to charge the battery to nearly 100%. From that moment on, the load disconnection level is modulated so that the battery is charged to nearly 100% approximately once a week. Programmable battery charging algorithm Every morning, as soon as the sun starts shining, the charge controller begins a new charging cycle based on a three-step charging process: Bulk – Absorption – Float. The battery charging algorithm is programmable with a set of default settings or user-defined settings. Internal temperature sensor Compensates absorption and float charging voltages for temperature. Remote on/off For connection to a VE.BUS BMS, for example. Programmable relay Can be programmed (e.g. via a smartphone) to be activated by an alarm or other events. Optional: Connectable LC display To do this, remove the rubber seal protecting the plug on the front of the controller and connect the display to it. We would be happy to provide you with more information about this product. Please contact us contact join us.