Victron SmartSolar MPPT 150/85-MC4 VE.Can (12/24/48V)
Victron SmartSolar MPPT 150/85-MC4 VE.Can (12/24/48V) For heavier solar power installations where a large panel field is connected directly using MC4 connectors and multiple charge controllers need to work together as a single system. Up to 25 units synchronized via VE.Can, with wireless readout in VictronConnect. VE.Can for synchronized parallel operation Two VE.Can ports enable up to 25 charge controllers to operate in synchronized parallel: they run through the same charging phase together and switch simultaneously from bulk to absorption and float. Via VE.Can, the controller also communicates directly with a GX device and with batteries that support the protocol. The last unit in the chain is terminated with a terminator. Direct MC4 connection * Three pairs of MC4 connectors, internally parallel-connected to a single MPPT tracker * Maximum 30 A per MC4 connection * Maximum PV open-circuit voltage 150 V absolute (coldest conditions), 145 V at startup and operation * Maximum PV short-circuit current 70 A * Protected against PV reverse polarity Built-in Bluetooth Bluetooth Smart is built-in; no dongle is required. With VictronConnect on your smartphone, tablet, or laptop, you can read current yield, battery voltage, and charge status, change settings, and retrieve the history for the last thirty days. Firmware updates are performed via the same app. Ultra-fast MPPT with shadow detection The ultra-fast MPPT algorithm continuously monitors voltage and current across the panel field and maintains the maximum power point, even in rapidly changing cloud cover. In partial shading, multiple power peaks occur on the voltage curve; advanced shadow detection actively searches for the highest peak. Maximum efficiency 98%. Power and battery voltage * Maximum charging current 85 A * Automatic selection 12, 24 or 48 V; 36 V manually adjustable * Nominal PV power 1200 W at 12 V, 2400 W at 24 V, 3600 W at 36 V and 4900 W at 48 V * Battery terminals up to 35 mm² / AWG2 * Self-consumption <35 mA at 12 V and <20 mA at 48 V Adaptive charging and BatteryLife The charge controller operates with an adaptive multi-stage charging algorithm with eight pre-programmed battery profiles and a fully user-configurable profile. The absorption time is determined by the battery voltage at startup. The BatteryLife algorithm adjusts the charging threshold daily when the battery does not structurally reach full charge. Temperature compensation -16, -32, -48 or -64 mV/°C, depending on the system voltage. Programmable relay and remote control The programmable DPST relay (AC 4 A up to 240 Vac, DC 4 A up to 35 Vdc and 1 A up to 60 Vdc) can be used for applications including a generator alarm or switching a dump load. Additionally, a remote two-pole on/off connection is available, for example for control from a battery management system using the VE.Direct non-inverting remote on-off cable (ASS030550320) (https://shop.top.systems/installatie/kabels/remote-control/victron-ve-direct-non-inverting-remote-on-off-cable.html). Reading on the device itself The controller has a plug-in opening for the optional SmartSolar Pluggable Display (SCC900650010) (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=41&artdetail=SCC900650010), which allows yield, battery voltage, and charging phase to be read directly on the device without a smartphone or panel. Installation and environment * Protected against PV reverse polarity, output short circuit, and overtemperature * Protection class IP43 for the electronics and IP22 for the connection area * Operating temperature -30 to +60 °C, full power up to 40 °C * Maximum installation altitude 5000 m, full power up to 2000 m * Can be shielded safely with the MPPT WireBox-XL MC4 (SCC950400310) (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=41&artdetail=SCC950400310) Can be ordered directly with this product * Victron MPPT WireBox-XL MC4 150-85/100 & 250-85/100 VE.Can (SCC950400310) (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=41&artdetail=SCC950400310) * Staubli MC4 connector set male and female (SOLAR0095486) (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=41&artdetail=SOLAR0095486) * Staubli MC4 splitter set 1000V (SOLAR0095518) (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=41&artdetail=SOLAR0095518) * Topsolar cable red 6mm² per meter (KABSOL000007) (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=41&artdetail=KABSOL000007) * Topsolar cable black 6mm² per meter (KABSOL000008) (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=41&artdetail=KABSOL000008) * Solar cable 6mm² 1 meter MC4 male/female (SCA000100100) (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=41&artdetail=SCA000100100) * Solar cable 6mm² 3 meters MC4 male/female (SCA000300100) (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=41&artdetail=SCA000300100) * Solar cable 6mm² 5 meters MC4 male/female (SCA000500100) (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=41&artdetail=SCA000500100) * More accessories in the category Solar panel accessories (https://shop.top.systems/zonnestroom/accessoires-zonnepanelen/) Related products * Victron SmartSolar MPPT 150/85-Tr VE.Can (SCC115085411) (https://shop.top.systems/zonnestroom/omvormers-zonnepanelen/victron-smartsolar-mppt-150-85-tr-ve-can-12-24-36-48v.html) — same controller with screw terminals * Victron SmartSolar MPPT 150/100-MC4 VE.Can (SCC115110511) (https://shop.top.systems/zonnestroom/omvormers-zonnepanelen/victron-smartsolar-mppt-150-100-mc4-ve-can-12-24-48v.html) — same version with 100 A charging current * Victron SmartSolar MPPT 150/70-MC4 VE.Can (SCC115070511) (https://shop.top.systems/zonnestroom/omvormers-zonnepanelen/victron-smartsolar-mppt-150-70-mc4-ve-can-12-24-36-48v.html) — same version with 70 A charging current * The full range can be found in the category Solar panel inverters (https://shop.top.systems/zonnestroom/omvormers-zonnepanelen/) Documentation * Manual SmartSolar MPPT 150/70 to 250/100 VE.Can (PDF, NL) (https://www.victronenergy.com/upload/documents/Manual_SmartSolar_MPPT_150-70_up_to_250-100_VE.Can/29694-MPPT_solar_charger_manual-pdf-nl.pdf) * Manual SmartSolar MPPT 150/70 to 250/100 VE.Can (HTML, EN) (https://www.victronenergy.com/media/pg/Manual_SmartSolar_MPPT_150-70_up_to_250-100_VE.Can/en/index-en.html) * Manual SmartSolar MPPT 150/70 to 250/100 VE.Can (PDF, EN) (https://www.victronenergy.com/upload/documents/Manual_SmartSolar_MPPT_150-70_up_to_250-100_VE.Can/29694-MPPT_solar_charger_manual-pdf-en.pdf) * Datasheet SmartSolar Charge Controller MPPT 150/70 to 150/100 VE.Can (NL) (https://www.victronenergy.com/upload/documents/Datasheet-SmartSolar-charge-controller-MPPT-150-70-up-to-150-100-VE.Can-NL.pdf) * Datasheet SmartSolar Charge Controller MPPT 150/70 up to 150/100 VE.Can (EN) (https://www.victronenergy.com/upload/documents/Datasheet-SmartSolar-charge-controller-MPPT-150-70-up-to-150-100-VE.Can-EN.pdf) * Dimensioning drawing SmartSolar MPPT XL MC4 VE.Can (PDF) (https://www.victronenergy.com/upload/documents/DimensionDrawing-MPPT-XL-VE.Can-MC4.pdf) * EU Declaration of Conformity SmartSolar MPPT 150/85 Tr VE.Can and MC4 VE.Can (https://www.victronenergy.com/upload/documents/Smartsolar-MPPT-150-85-Tr-VE.Can-&-MC4-VE-Can-EU-DOC-RED.pdf) * Certificate CB IEC 62109-1 – SmartSolar MPPT 150/85 to 250/100 VE.Can (https://www.victronenergy.com/upload/documents/Certificate-CB-17PP231-IEC-62109-1-SmartSolar-MPPT-150-85-up-to-250-100-VE.Can.pdf) * Certificate EN/IEC 62109-1 – SmartSolar MPPT 150/85, 150/100, 250/85 and 250/100 (https://www.victronenergy.com/upload/documents/Certificate-EN-IEC-62109-1-SmartSolar-MPPT-150-85-150-100-250-85-250-100.pdf) * Safety Certificate IEC 62109-1 AS/NZS – MPPT 150/85 & 150/100 Tr and MC4 (https://www.victronenergy.com/upload/documents/Certificate-Safety-IEC-62109-1-AS-NZS-MPPT-150-85-&-150-100-Tr-and-MC4-&-addendum.pdf) * Certificate UL 1741 and CSA C22.2 – SmartSolar MPPT 150/45 up to 250/100 (https://www.victronenergy.com/upload/documents/Certificate-UL-1741-and-CSA-C22.2,-16938-1S-SmartSolar-MPPTs-150-45-up-to-250-100.pdf) * Declaration of Conformity SmartSolar MPPT Charge Controllers VE.Can (https://www.victronenergy.com/upload/documents/SmartSolar-MPPT-Charge-Controllers-VE.Can-2021-12-29.pdf) * UK PSTI Statement of Compliance SmartSolar MPPT Tr, MC4 and VE.Can (https://www.victronenergy.com/upload/documents/SmartSolar-MPPT-Tr,MC4-and-VE-CAN-03-2024.pdf) * VE.Direct Protocol (https://www.victronenergy.com/upload/documents/VE.Direct-Protocol-3.34.pdf) Videos * Victron MPPT charge controllers (EN) (https://www.victronenergy.com/upload/documents/Promo%20videos/Ad%20videos/MPPT/16×9/EN_MPPT.mp4) * Did you know… why the MPPT charge controller starts 5 Vdc above the battery voltage? (https://www.youtube.com/watch?v=EVAvRs32TiE) * Did You Know – Trigger a dump load when your batteries are full (https://www.youtube.com/watch?v=dT89QtG2pS4) * Did You Know – How to create a battery profile for non-Victron batteries? (https://youtu.be/QG4-TYcIY30) * Did You Know – How to change the device name (https://youtu.be/2L4nzNwep7g) Contact Would you like to know how many panels you can fit on this controller, or how to connect multiple charge controllers via VE.Can? Our specialists would be happy to calculate it for you and help you with mounting, cabling, and monitoring. Contact us via top.systems/nl/contact (https://www.top.systems/nl/contact/). Specifications Battery voltage 12, 24 or 48 V automatic; 36 V manual Maximum charging current 85 A Nominal PV power 12 V 1200 W Nominal PV power 24 V 2400 W Nominal PV power 36 V 3600 W Nominal PV power 48 V 4900 W Max. PV open-circuit voltage 150 V absolute maximum; 145 V at start and operation Max. PV short-circuit current 70 A PV connection 3 pairs of MC4 connectors, max. 30 A per connection Maximum efficiency 98% Self-consumption 12 V: <35 mA / 48 V: <20 mA Charging algorithm multi-stage adaptive, eight pre-programmed profiles or user-defined Charging voltage absorption 14.4 / 28.8 / 43.2 / 57.6 V Charging voltage float 13.8 / 27.6 / 41.4 / 55.2 V Charging voltage equalization 16.2 / 32.4 / 48.6 / 64.8 V Temperature compensation -16 / -32 / -48 / -64 mV/°C Protection reverse PV polarity, output short circuit, overtemperature Data communication 2x VE.Can, VE.Direct port and built-in Bluetooth Remote on/off yes, two-pole connection Programmable relay DPST; AC 4 A up to 240 Vac, DC 4 A up to 35 Vdc and 1 A up to 60 Vdc Parallel operation synchronized via VE.Can, max. 25 units Battery terminals 35 mm² / AWG2 Protection class IP43 (electronics), IP22 (connection area) Operating temperature -30 to +60 °C (full power up to 40 °C) Humidity 95%, non-condensing Maximum altitude 5000 m (full power up to 2000 m) Pollution degree PD3 Color blue (RAL 5012) Dimensions (hxwxd) 246 x 295 x 103 mm Weight 4.5 kg Safety standards EN/IEC 62109-1, UL 1741, CSA C22.2 EAN 8719076050346 We would be happy to provide you with more information about this product. Please contact us
contact join us.
