Victron SmartSolar MPPT RS 450/200-MC4

Victron SmartSolar MPPT RS 450/200-MC4

Victron SmartSolar MPPT RS 450/200-MC4 Victron SmartSolar MPPT RS 450/200-MC4 Applications Four independent MPPT trackers, 450 V PV voltage, and 11,520 W charging capacity on a single 48 V battery bank. For large off-grid installations, commercial vessels, and solar parks where you want to work with standard string panels and long cable runs. Four independent MPPT trackers Each tracker manages its own strings, up to 4,000 W and 7,200 Wp per tracker. This allows you to connect panel arrays with different orientations, tilt angles, or shading patterns to a single unit without the weakest array dragging down the rest. High PV voltage up to 450 V With a maximum array voltage of 450 V, you can work with standard string panels and long series. This significantly reduces current in the PV cabling, limits voltage loss over long distances, and reduces the number of parallel strings and fuses. Galvanically Isolated The PV input is galvanically isolated from the battery output. This simplifies the grounding design and is important for installations where the PV side and the battery side must not be connected. Built-in Bluetooth, VE.Direct, and VE.Can Bluetooth Smart is included as standard. With VictronConnect, you can read live data and history, change settings, and perform firmware updates from a smartphone, tablet, or laptop. Via VE.Can or VE.Direct, you connect to a GX device as a communication center, through which the data is also transferred to the VRM Portal (https://vrm.victronenergy.com/login). Charging and battery monitoring * 200 A maximum charging current at 48 V * Absorption voltage standard 57.6 V and float voltage 55.2 V, both adjustable * Battery temperature sensor included * Battery voltage detection Programmable relay and remote on/off * Programmable relay for alarming or switching a generator or load * Remote on/off, controllable from a VE.Bus battery management system, among others Connection and installation * PV via MC4 connectors, battery via four M8 bolts (2x plus and 2x minus) * Dimensions 487 x 435 x 147 mm, weight 13.7 kg * Protection class IP21 * Operating temperature -40 to +60 °C Protections * Reverse polarity protection on the PV input up to 20 A short-circuit current per tracker * Maximum operating current 16 A per tracker Documentation * Manual Isolated SmartSolar MPPT RS 450/100 & 450/200 (NL, PDF) (https://www.victronenergy.com/upload/documents/SmartSolar_MPPT_RS/13860-SmartSolar_MPPT_RS-pdf-nl.pdf) * Manual Isolated SmartSolar MPPT RS 450/100 & 450/200 (EN, PDF) (https://www.victronenergy.com/upload/documents/SmartSolar_MPPT_RS/13860-SmartSolar_MPPT_RS-pdf-en.pdf) * Manual online (EN) (https://www.victronenergy.com/media/pg/SmartSolar_MPPT_RS/en/index-en.html) * Datasheet SmartSolar MPPT RS 450/100 & 450/200 (NL) (https://www.victronenergy.com/upload/documents/Datasheet-SmartSolar-MPPT-RS-NL.pdf) * Datasheet SmartSolar MPPT RS 450/100 & 450/200 (EN) (https://www.victronenergy.com/upload/documents/Datasheet-SmartSolar-MPPT-RS-EN-.pdf) * Dimensioning drawing MPPT RS 450/200-MC4 (EN) (https://www.victronenergy.com/upload/documents/DimensionDrawing-MPPT-RS-450-200_MC4.pdf) * Safety certificate IEC 62109-1 (EN) (https://www.victronenergy.com/upload/documents/Certificate-Safety-IEC-62109-1-SmartSolar-MPPT-RS-450-200-MC4-&-100-MC4.pdf) * EU Declaration of Conformity RED (EN) (https://www.victronenergy.com/upload/documents/SmartSolar-MPPT-Charge-Controllers-MPPT-RS-EU-DOC-RED.pdf) * UK PSTI Statement (EN) (https://www.victronenergy.com/upload/documents/SmartSolar-MPPT-RS-03-2024.pdf) Videos * Victron Energy: creating a battery profile for non-Victron batteries (EN) (https://youtu.be/QG4-TYcIY30) Contact Would you like to have the string configuration across four trackers calculated, or know which DC fuse and cable cross-section correspond to 200 A? Our specialists are happy to help you with the complete design. Please contact us (https://www.top.systems/nl/contact/). Specifications Maximum charging current 200 A Battery voltage 48 V Maximum PV voltage 450 V DC Number of MPPT trackers 4 Maximum charging power 4000 W per tracker, 11520 W total Maximum PV array per tracker 7200 Wp Maximum PV operating current 16 A per tracker Reverse polarity protection PV 20 A short-circuit current per tracker Absorption voltage 57.6 V standard, adjustable Floor voltage 55.2 V standard, adjustable Battery temperature sensor Included Battery voltage detection Yes Communication VE.Direct, VE.Can and built-in Bluetooth Programmable relay Yes Remote on/off Yes Operating temperature -40 to +60 °C Protection class IP21 Battery connection Four M8 bolts, 2x plus and 2x minus PV connection MC4 connectors Dimensions (hxwxd) 487 x 435 x 147 mm Weight 13.7 kg Standards EN/IEC 62109-1 We would be happy to provide you with more information about this product. Please contact join us.