Victron SmartSolar Pluggable Display

Victron SmartSolar Pluggable Display

Victron SmartSolar Pluggable Display Victron SmartSolar Control Display The SmartSolar Control Display is an LCD display that plugs directly into the display port on the front of a charge controller. Remove the rubber seal protecting the port, insert the display, and it is ready for use — no cables, no configuration. The display shows live and historical data and provides access to the charge controller settings. Applications With larger MPPT charge controllers, everything you need is already built into the device; the only thing missing is a screen. This display fills that gap without extra cabling or paneling, and is hot-swappable — you can leave it in place permanently or take it along as a service tool to read and configure multiple installations. * Fixed reading at the charge controller in the control cabinet or technical room * Service tool for installers managing multiple systems * Off-grid installations without a GX device or network connection * Commissioning and aftercare without a phone or laptop What you can read * PV power, yield, voltage, and current * Battery voltage, charging current, and charging phase * Status and current of the load output, provided the charge controller has one * Daily yield and historical values In the status menu, you cycle through the measured values ​​using the minus and plus buttons. Holding both buttons down for four seconds activates the automatic cycle-through mode. Changing settings The settings of the charge controller and the display can be viewed and adjusted via the setup menu. Only change settings whose effect you know; incorrect values ​​can cause damage to the battery. Mounting For permanent use, the display is secured with the supplied tape and screws. If it is used as a temporary display, this is not necessary — the display is hot-swappable and can be inserted and removed while the charge controller is in operation. Selection Guide The display is compatible exclusively with BlueSolar and SmartSolar MPPT charge controllers from the 150 V and 250 V series equipped with a display port. You can identify these models by the plastic flap on the front with the text "display option". If your charge controller does not have a display port, the MPPT Control (SCC900500000) with VE.Direct connection is the alternative. Documentation * SmartSolar Control display manual (EN, HTML5) (https://www.victronenergy.com/media/pg/SmartSolar_Control_Display/en/index-en.html) * SmartSolar Control display manual (EN, PDF) (https://www.victronenergy.com/upload/documents/SmartSolar_Control_Display/34488-SmartSolar_Control_display_manual-pdf-en.pdf) * Declaration of Conformity – SmartSolar MPPT charge controllers (PDF) (https://www.victronenergy.com/upload/documents/SmartSolar-MPPT-Charge-Controllers-2021-12-29.pdf) * Victron Energy ISO 9001 certificate (PDF) (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) Victron Energy does not publish Dutch-language documentation or a datasheet for this item; The manual and certificates are in English. Contact Not sure if your charge controller has a DisplayPort? Send us the model number, and we will find out for you. Contact us (https://www.top.systems/nl/contact/). Specifications Suitable for BlueSolar and SmartSolar MPPT 150 V and 250 V with DisplayPort Installation Plug into the DisplayPort on the front of the charge controller Connector RS232, 9-pin pinout Dimensions (WxDxH) 116 x 50 x 25 mm Weight 66 g Hot-swappable Yes Manufacturer Victron Energy Warranty 5 years We would be happy to provide you with more information about this product. Please contact us contact join us.