Victron SmartShunt 2000A/50mV

Victron SmartShunt 2000A/50mV

Victron SmartShunt 2000A/50mV Victron SmartShunt 2000 A The SmartShunt is a complete battery monitor without a display: the phone is the screen. All electronics are located on the shunt itself, meaning no cable runs to a panel and nothing needs to be cut out. Via Bluetooth and the VictronConnect app, you can read charge status, voltage, current, consumed ampere-hours, and remaining runtime. This version is suitable for up to 2000 A, making it the heaviest in the series. Applications In a large DC main distribution system, all current flows through a single point — and you want to be able to measure that point without compromising accuracy. This version does just that up to 2000 A, with the same measurement resolution and the same app as the smaller models, and at a fraction of the cost of an industrial measurement solution. * Commercial shipping and large yachts with a heavy DC main distribution * Electric propulsion and traction applications * Industrial and commercial energy storage in a dry room * Installations with multiple inverter/chargers on a single battery bank What you read out * Battery voltage, current, and power * Ampere-hours consumed, charge status, and remaining runtime * History: deepest discharge, average discharge, number of cycles, highest and lowest voltage * Trends over the stored measurement period Auxiliary input The second red cable can be configured for one of three functions: voltage of a second battery (6.5 – 70 VDC), center point voltage of a battery bank, or temperature via the optional sensor ASS000100000. With center point monitoring, the monitor calculates the percentage deviation and triggers an alarm as soon as it exceeds a set limit. Connection and integration In addition to Bluetooth, there is a VE.Direct port for pairing with a GX device, after which the data is available locally and via the VRM portal. Via VE.Smart networking, the monitor wirelessly shares battery voltage and current with Victron charge controllers and some battery chargers, making charge control more accurate. The device can also be configured as a DC meter for a separate DC circuit. Differences compared to a BMV-712 Smart * No visual or audible alarm on the device itself; alarms are received via the app or the GX device * No programmable relay * The electronics are fixed to the shunt instead of in a separate display unit * Less cabling and no panel cutout required Mounting The device is IP21 rated and must therefore be mounted in a dry location. The base contains two 5.5 mm holes for screwing or bolting the unit to a solid surface; screws are not included. The shunt is the only component that should be connected to the negative terminal of the battery; all consumers and chargers connect to the LOAD MINUS side. In this version, the connection bolts are M10 and the maximum tightening torque is 21 Nm. This is the largest housing in the series; Reserve the space in the control cabinet design in advance. Bluetooth range The shunt and power cables affect the Bluetooth range; in practice, approximately 10 to 15 meters remain. If the monitor is located in a metal cabinet or close to a steel casing, this may be insufficient. In that case, add a VE.Direct Bluetooth Smart dongle (ASS030536011) and disable Bluetooth in the SmartShunt. Documentation * SmartShunt Manual (EN, HTML5) (https://www.victronenergy.com/media/pg/SmartShunt/en/index-en.html) * SmartShunt Manual (EN, PDF) (https://www.victronenergy.com/upload/documents/SmartShunt/9172-Manual_BMV_and_SmartShunt-pdf-en.pdf) * Quick Start Guide (EN, PDF) (https://www.victronenergy.com/upload/documents/Quick-Install-Guide-SmartShunt-EN.pdf) * SmartShunt Datasheet (EN, PDF) (https://www.victronenergy.com/upload/documents/Datasheet-SmartShunt-EN.pdf) * Dimensioning Drawing 2000 A (PDF) (https://www.victronenergy.com/upload/documents/SmartShunt-2000A50mV.pdf) * 3D Dimensioning 2000 A (PDF) (https://www.victronenergy.com/upload/documents/SmartShunt-2000A50mV-3D.pdf) * 3D Model 2000 A (STEP) (https://www.victronenergy.com/upload/documents/SmartShunt-2000A50mV-(stp).STEP) * VictronConnect App Manual (EN, HTML5) (https://www.victronenergy.com/media/pg/VictronConnect_app/en/index-en.html) * EU Declaration of Conformity SmartShunt (PDF) (https://www.victronenergy.com/upload/documents/Smartshunt-EU-DOC-RED.pdf) * ECE R10-6 Automotive Certificate (PDF) (https://www.victronenergy.com/upload/documents/Certificate-Automotive-ECE-R10-6-SmartShunt.pdf) * Declaration of Conformity – battery monitors BMV and SmartShunt (PDF) (https://www.victronenergy.com/upload/documents/Battery-Monitor-BMV-&-SmartShunt-2024-08-27.pdf) * ISO 9001 certificate Victron Energy (PDF) (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) Victron Energy publishes the manual in German and Spanish, among other languages, but not in Dutch; the datasheet and certificates are in English. Videos * Victron SmartShunt – Monitor batteries via Bluetooth (Victron Energy, EN) (https://youtu.be/0HG4GiH9su8) * SmartShunt vs. waterproof SmartShunt IP65 (Victron Energy, EN) (https://www.youtube.com/watch?v=x3dUwlPcwEw) * How to optimize the sync parameters (Victron Energy, EN) (https://www.youtube.com/watch?v=4ReljfO3k6M) Contact Are you unsure which current rating suits your installation, or are you hesitating between this version and the waterproof IP65 version? Our specialists would be happy to calculate it for you. Please contact us (https://www.top.systems/nl/contact/). Specifications Current 2000 A / 50 mV Supply voltage 6.5 – 70 VDC Self-consumption < 1 mA Auxiliary input Second battery (6.5 – 70 VDC), center point or temperature Temperature measurement range -20 to +50 °C Adjustable battery capacity 1 – 9999 Ah Communication Bluetooth and VE.Direct Current resolution ± 0.01 A Voltage resolution ± 0.01 V Ampere-hour resolution ± 0.1 Ah State of charge resolution ± 0.1 % Current measurement accuracy ± 0.4 % Offset Less than 40 mA Voltage measurement accuracy ± 0.3 % Dimensions (hxwxd) 68 x 168 x 100 mm Connection bolts M10, max. tightening torque 21 Nm Mounting holes 2x 5.5 mm in the base, screws not included Protection class IP21, not waterproof Operating temperature -40 to +50 °C Included Cables: 2 red cables with 1 A slow-blow fuse, for the positive and for the auxiliary connection. Temperature sensor: Optional, ASS000100000. Safety: EN 60335-1, EMCEN-IEC 61000-6-1 / -6-2 / -6-3, Automotive: EN 50498. Warranty: 5 years. We would be happy to provide you with more information about this product. Please contact us contact join us.